Yes, all the Big Foot 10-1/4” Blades have a diamond knockout. Just place your new Big Foot Blade so the writing is facing down and the hole is elevated up. Hit the corner of the round hole. The diamond knockout should pop right out.
No. Once you convert your 7-1/4” saw into a Big Foot 10-1/4” saw it can’t be turned back to a factory 7-1/4” saw.
No, the saw weighs only 14.68 lbs, which is the tool only, not including the blade and cord. That is only 0.55 lbs heavier than you standard 7-1/4″ SKILSAW® you are already using today.
No, it doesn’t wobble at all. The Big Foot 10-1/4” Blade was designed for the Big Foot Saw itself. The only reason for the Big Foot Blade to wobble is missing teeth or being dull. So always keep an extra 10-1/4” blade on hand with you.
Yes, the Big Foot Saw meets all OSHA Standards & Requirements, and all the stat requirements, also.
It also meets WASHA standards.
Yes the Big Foot Saw has the same warranty as the Skil®/Bosch® 7-1/4” saws. There is a 1-year warranty on all Big Foot parts.
Magnesium is roughly 34% lighter than aluminum. Big Foot Tools was the very first company to offer a complete saw with all guards made out of magnesium.
The saw is an after- market attachment for your Skil/Bosch 7-1/4” saw. The 10-1/4” blade draws more amps than your factory saw. By using a 10-gage cord you will draw fewer amps, resulting in a longer life span for your Big Foot Saw. Twenty year-old Big Foot Saws are still in use today.
You will lose a minimum of 4” when clamping the Head Cutter chainsaw attachment on to your chainsaw.
Unfortunately our Adapter Kit does NOT fit the Skilsaw 7-1/4″ Lightweight Magnesium saw (SPT77WML-22). The body of this saw is shorter that the regular 7-1/4″ skilsaw (SPT77W), however our parts are made of magnesium making the saw lighter than other 10-1/4″ saws.
The Big Foot 10-1/4″ 75° Swing table was designed for the Big Foot Saw, and is not compatible with other saws.
The Pea Shooters are compatible with nail sizes 3D to 30D, with a nail head size 13/64” to 7/16”.
The Big Foot 10-1/4″ Adapter kits do NOT fit the Skilsaw 8-1/4″ worm drive saws. The Adapter Kits were designed to fit the Skilsaw 7-1/4″ saws (SPT77W).
Our Big Foot Adapter Kits were designed to fit the Skilsaw 7-1/4″ saws.
We do not sell the 14″ as an adapter kit. It is sold only as a complete saw.
Yes we now have Pea Shooters with a magnetic tip on the end of the barrel. This will allow you to be able to nail from start to finish.